LTE-A: Downlink Transmission Mode 9 (TM-9)

LTE-A: Downlink Transmission Mode 9 (TM-9)

When LTE was introduced in Release-8 it had 7 transmission modes that were increased to 8 in Release-9. Earlier, I posted an R&S whitepaper on the different Transmission modes (10K+ views already) that listed transmission modes till TM 8. In Release-10 (LTE-A) 3GPP Introduced a new transmission mode, TM 9. TM9 is designed to help reduce interference between base stations to maximise signal stability and boost performance. The new TM-9 enables the enhancement of network capabilities and performance with minimum addition of overhead. TM9 is designed to combine the advantages of high spectrum efficiency (using higher order MIMO) and cell-edge data rates, coverage and interference management (using beamforming). Flexible and dynamic switching between single-user MIMO (SU-MIMO) and an enhanced version of multi-user MIMO (MU-MIMO) is also provided.



A new Downlink Control Information (DCI) format - known as format 2C - is used for TM9 data scheduling. Two new reference signals are defined in TM9: Channel State Information Reference Signal (CSI-RS) and Demodulation Reference Signal (DMRS). The first is used from the UE to calculate and report the CSI feedback (CQI/PMI/RI), while the latter is an evolution - providing support for more layers - of the UE specific reference signal that is already used for beamforming in Rel-9, and is used for signal demodulation. TM-9 is particularly smart as it can detect when a mobile device is being used and send a different type of signal that is optimal for a mobile device (variable DM-RS – demodulation reference signals). This maximises the efficient use of the base station and guarantee’s a decent data rate for users.


Early results in SK Telecom press release are positive with a claimed 10-15% increase in data rates in locations where there was known inter-cell interference.

I also looked into couple of books and here is one explanation from An Introduction to LTE by Chris Cox.

Comments